Tag Archives: rolls

Forged Rolls

Home » Posts tagged "rolls"
Rolling Mill Rolls, , ,

Forged rolls Manufacturers

We have been the leading Forged Rolls Manufacturers and Forged Rolls supplier and exporter to varied clients everywhere the globe. Our Forged Rolls Manufacturers have diverse applications and features. they will be utilized in various different Steel Rolling Mill plants for various purposes. Our Forged Rolls Manufacturers are manufactured with precision by experienced technicians. We only use the most effective quality raw materials.

forged rolls manufacturers

Forging wherein the material is hammered consistent with the customers sizes & requirements, may be a process during which the ingot is heated within the furnace & then forged. The forging process help in cohesiveness and strength by elongation of the grain structure, which ends up in material having much higher load bearing capacities as compare to casted material. Thus these rolls being so superior in wear resistance to that of Cast Steel Rolls are specially adapted for roughing and intermediate plate mills and rod or bar mill rougher.

We strive to cope up with the increasing market demand of Forged Rolls and to take care of the specified standard. We manufacture the cast Rolls only as per M.S. rolls, forged en-8 rolls, forged en-9 rolls, forged en-31 rolls, forged en-42 rolls, etc. It comes along side Forging & machining consistent with the drawing specified. These are only fabricated in other specifications when a client is seen requesting that. this is often the sole reason we are the most effective quality Forged Rolls manufacturers in India. These Rolls are suitable for All Grade Forged Cylinders, Forged Automobile & Crane Parts, Roughing Stand Forged Rolls, Forged Rolls for Stainless Steel Mills, Forged Roll for Hot Steel Rolling Mills, Etc.

We are leading Forged Rolls manufacturers in India. Our attitude of constant learning opened the doors towards the most recent technology. This aided us in delivering the specified designs that are trending within the market. We are leading together of the best Forged Rolls manufacturers, suppliers & exporters consistently. Our delightful customer base keeps us motivated to be a continuing learner and supplier.

Chemical Composition

GradeC%Mn%Si%S%P%Cr%Ni%Mo%
EN-8
0.35-0.45
0.60-1.00
0.10-0.35
0.02 MAX
0.02 MAX
–
–
–
EN-9
0.50-0.60
0.50-0.80
0.05-0.35
0.02 MAX
0.02 MAX
–
–
–
EN-42
0.70-0.85
0.55-0.75
0.10-0.40
0.02 MAX
0.02 MAX
–
–
–
EN-31
0.9-1.2
0.30-0.75
0.10-0.35
0.02 MAX
0.02 MAX
1.0-1.6
 
 

Manufacturing Process

We have been the approaching Forged Rolls manufacturers within the country and have major companies in several industries as a part of our clientele. Our products are constantly in demand thanks to their premium quality and finish. Our Forged Rolls are produced with state of the art hi-tech equipment and machines. we’ve a talented and experienced pool of technicians ensuring that the product has begin in its best state at every stage of production. All the cast Rolls coming from our facility are in compliance with international standards. they’re delivered consistent with the specification of the customer.

Forged Rolls manufacturers | Forged Rolls manufacturers in India | Forged Rolls manufacturers in Punjab | Forged Rolls manufacturers in Ludhiana | Forged Rolls manufacturers in Mandi Gobindgarh | Forged Rolls manufacturers in Malerkotla

One Stop Shop for all Rolling Mill Machinery Requirements.

Contact Us

SG Iron Rolls

Home » Posts tagged "rolls"
Rolling Mill Rolls, , , , ,

SG Iron Rolls Manufacturers

Our creative skills and experience computed together to make us one of the popular names amongst SG Iron Rolls manufacturers in the country. The expert team here at Shree Gautam International comprises of a highly professional and skillful workforce. We are known as a reputed SG Iron Rolls manufacturer & exporter because of the premium quality we serve.

sg iron rolls manufacturers

SG Iron Rolls are made of finest grade spheroidal graphite iron or ductile iron. It is a type of iron in which graphite is found in substantial quantity. The utility of such iron rolls is wide and varied. These rolls can be used by structural item manufacturers as well as TMT bar manufacturing industry. Special properties of SG Iron Rolls make it suitable for use in cold/hot iron steel relocating mills or by the manufacturers of all kinds of structural products such as squares, general angles, flat angles, bar and other such products. We also produce a good range of other SG Iron Rolls including Pearlitic SG iron Rolls & Acicular SG Iron Rolls. Shree Gautam International is leading global SG iron Rolls manufacturers in India.

Shree Gautam International is recognised as one of the reliable SG Iron Rolls Manufacturers in India. Customized to clients requirement assuring the best quality which is used in TMT Rolling Mill, Rebar Rolling Mill, Wire Rod Rolling Mill, Seamless Steel Tube Mills, Intermediate Stand, Finishing Stand, Structural mill, Merchant Mill, Roughing stands.

Top SG Iron Rolls manufacturers

We are always looking forward to widening our business reach to attain precedent heights. Our continuous and dedicated efforts have finally brought laurels to the brand. We are a proud SG Iron Rolls manufacturer at the global level. The transparency and loyalty that we maintain with our clients make us the first choice in SG Iron Rolls manufacturer business.

Types of SG Iron Rolls

Pearlitic SG iron Rolls: Pearlitic Spheroidal Graphite Rolls have a thick layer of cast iron with nodular graphite, the name of such roll is based on the fact that the material consists of nodular graphite and carbides in a pearlitic matrix, the softest grades have a pearlitic matrix containing ferrite around the graphite nodules, while the higher hardness grades have a complete pearlitic matrix, the carbide content increases proportionately with the hardness.

Acicular SG Iron Rolls: Acicular Spheroidal Graphite Rolls also have a thick layer of cast iron with nodular graphite, here, the name of such roll is based on the fact that the material consists of nodular graphite and carbides in a pearlitic – bainitic matrix, the carbide content is considerably higher in the harder grades than the softer ones.

Chemical Composition

MaterialHardness (SH-D)C%Mn%Si%Cr%Ni%Mo%S%P%
S.G. (Pearlitic)
40-50
3.00-3.30
0.30-0.60
1.50-2.30
0.015 MAX
0.10 MAX
0.30 MAX
1.50-2.00
0.25-0.40
S.G. (Pearlitic)
50-60
3.00-3.30
0.30-0.60
1.50-2.30
0.015 MAX
0.10 MAX
0.30 MAX
1.50-2.00
0.25-0.40
S.G. (Pearlitic)
60-70
3.10-3.50
0.50-1.00
1.30-1.80
0.015 MAX
0.10 MAX
0.30-0.80
1.50-2.50
0.30-0.60
S.G. (Pearlitic)
70-75
3.10-3.50
0.50-1.00
1.30-1.80
0.015 MAX
0.10 MAX
0.30-0.80
1.50-2.50
0.30-0.60
S.G. (Acicular)
40-50
3.00-3.30
0.30-0.50
1.80-2.30
0.015 MAX
0.80 MAX
0.20 MAX
2.00-3.00
0.60-0.90
S.G. (Acicular)
50-60
3.00-3.30
0.30-0.50
1.80-2.30
0.015 MAX
0.80 MAX
0.20 MAX
2.00-3.00
0.70-1.00
S.G. (Acicular)
60-70
3.10-3.50
0.50-0.80
1.30-2.00
0.015 MAX
0.80 MAX
0.30-0.80
2.00-3.50
0.80-1.10
S.G. (Acicular)
70-80
3.10-3.50
0.50-0.80
1.30-2.00
0.015 MAX
0.80 MAX
0.30-0.80
2.00-4.50
0.80-1.10

SG Iron Rolls manufacturers | SG Iron Rolls manufacturers in India | SG Iron Rolls manufacturers in Punjab | SG Iron Rolls manufacturers in Ludhiana | SG Iron Rolls manufacturers in Mandi Gobindgarh |SG Iron Rolls manufacturers in Malerkotla

One Stop Shop for all Rolling Mill Machinery Requirements.

Contact Us

Alloy Steel Adamite Rolls

Home » Posts tagged "rolls"
Rolling Mill Rolls, , , ,

Alloy Steel Adamite Rolls Manufacturers

Shree Gautam International is an outstanding brand in the competitive crowd of Alloy Steel Adamite Rolls manufacturers. We stand out in the trending market abiding by the principles of professionalism and customer satisfaction. We design and present you with a reliable and unique range of Alloy Steel Adamite Rolls. We have established our presence in the local as well as International market.

alloy steel adamite rolls manufacturers

Alloy Cast Steel Rolls are obtained through a process of statically cast iron process. The rolls are classified as hypo-eutectoid steel rolls, which have been alloyed with Molybdenum and Chromium. The rolls are made to undergo heat treatment process involving double annealing. The process is followed tempering of the roll involving thermal shock resistance and toughness testing. The micro structure of Alloy Cast Steel Rolls is mainly pearlitic having broken cementite. The rolls are known for good weldability and offer high degree mechanical strength.

Shree Gautam International is in the race of top position with Alloy Steel Adamite Rolls manufacturers. The aura of the company has enabled us to take the overseas market.These Rolls are suitable for rolling medium and heavy sections. These rolls are also used for roughing stands of strip mill.

To improve the quality of the grey cast iron various alloying elements may be added to give the roll an increased hardness. These alloy iron rolls have only small quantities of nickel (Ni), chromium (Cr) and molybdenum (Mo) and they give slightly better wear and strength than the straight grey iron. The alloy iron roll with higher quantities of alloy additions is much harder and wears better though naturally it is more costly and must yield higher rolled tonnage. The presence of Ni promotes the formation of graphite but as it is in a very finely distributed form it leads to greater toughness and resistance to fire cracking. Cr increases the tendency to form combined carbon and restricts graphite formation so giving a much harder but more brittle iron. Mo and tungsten (W) promote the formation of combined carbon and in addition they add to high temperature strength. With a Cr alloy iron there is a tendency for collar breakage in section rolls due to the brittleness and in addition a good supply of water is necessary for cooling the rolls to avoid fire cracking. A typical analysis of the roll is C- 3 %, Si- 1%, Ni – 1 % (or Mo -0.5 %) and Cr – 1 %. A common brand of alloy iron roll is ‘Adamite’ iron. The hardness of rolls is a measure of the resistance to wear and it is usually expressed in degrees of Shore scleroscope hardness. We are a leading Alloy Steel Adamite Rolls from Malerkotla, India.

Chemical Composition

HardnessC%Mn%Si%Cr%Ni%Mo%S%P%
40-45
1.20-1.40
0.60-0.90
0.30-0.60
0.80-1.00
0.60 MAX
0.25-0.35
0.05 MAX
0.05 MAX
45-50
1.40-1.60
0.60-0.90
0.30-0.60
1.00-1.20
0.60 MAX
0.30-0.40
0.05 MAX
0.05 MAX
50-55
1.50-1.90
0.60-0.90
0.30-0.60
1.00-1.30
0.80-1.40
0.35-0.50
0.05 MAX
0.05 MAX

 

Alloy Steel Adamite Rolls manufacturers | Alloy Steel Adamite Rolls manufacturers in India | Alloy Steel Adamite Rolls manufacturers in Punjab | Alloy Steel Adamite Rolls manufacturers in Ludhiana | Alloy Steel Adamite Rolls manufacturers in Mandi Gobindgarh | Alloy Steel Adamite Rolls manufacturers in Malerkotla

One Stop Shop for all Rolling Mill Machinery Requirements.

Contact Us

Chilled Rolls

Home » Posts tagged "rolls"
Rolling Mill Rolls, ,

Chilled Rolls Manufacturers

We are one of the biggest and well-known Chilled Rolls manufacturers in India. We also produce a good range of other Chilled Rolls including ICCI Rolls, DPIC Rolls, Bainitic Chilled Rolls & Shafted Chilled Rolls. Customers appreciate our products for his or her quality features like dimensional accuracy, unmatched durability and excellent performance under tough conditions. We take time to research the necessity of each customer and also manufacture customized products when ordered in bulk.

chilled rolls manufacturers

The steel shafts are fitted within the Barrels with shrink fitting technology along side M.S lock nuts on each side of the barrels. This method annihilates the probabilities of loosening the shafts. We are concentrate on manufacturing chilled rolls barrels for TMT, FLAT BARS, ROUNDS, SQUARE MILLS, Etc. Whether mill is manual, automatic or semi-automatic.Proper chemical composition are going to be done consistent with the stand nos and material which need to be produce from our rolls. order and be tension free.
We are leading Chilled Rolls manufacturers & exporters in India.

A clear chilled roll features a surface layer of white iron produced by inducing rapid cooling at the surface (by means of a chill within the mould) which restricts the formation of free graphite. The core is of grey iron thanks to the slower rate of cooling and therefore the intermediate zone may be a mixture of white and gray iron. The necks and wobblers or spade ends aren’t to be chilled and hence retain greater toughness. The chilled layer is tough and wear resistant but it’s brittle. A product like Chilled Rolls requires accuracy and precision, and our expert team guarantees that. What makes us one among the most effective Chilled Rolls exporters is that the mutual affection with our clients.

Types of Chilled Rolls

1. ICCI Rolls: These are cast iron based rolls alloyed with Nickel, Chromium and Molybdenum having a matrix of pearlite and carbide with flake graphite. The material has very good thermal properties coupled with property of imparting good surface finish to the product.

2. DPIC Rolls: These Rolls are made of a high alloyed shell iron and a soft grey iron or ductile iron core metal depending on neck strength requirement. These rolls are cast both through centrifugal and static route.

3. Bainitic Chilled Rolls: Alloy elements of Ni、Mn、Cr、Mo etc., are added to bainitic nodular cast iron rolls for obtaining acicular (bainite-martensite) matrix in its micro structure of these rolls. These rolls can be produced by static casting and centrifugal casting.

4. Shafted Chilled Rolls: The steel shafts are fitted in the Barrels with shrink fitting technology along with M.S lock nuts on both sides of the barrels. This method annihilates the chances of loosening the shafts. We also Produce Chill Rolls Barrels by centrifugal casting, In this casting rolls remain free from pinholes and cracks.

Chemical Composition

HardnessC%Mn%Si%Cr%Ni%Mo%S%P%
60-70
3.00-3.30
0.60-0.90
1.10-1.50
0.80-1.20
1.50-1.80
0.25-0.35
0.06 MAX
0.15 MAX
70-75
3.10-3.40
0.60-0.90
0.70-1.10
1.20-1.60
2.50-4.00
0.25-0.40
0.050 MAX
0.10 MAX
50-60 (ICCI)
3.00-3.20
0.60-0.90
1.10-1.50
0.80-1.20
1.50-1.80
0.25-0.35
0.06 MAX
0.15 MAX
60-70 (ICCI)
3.00-3.30
0.60-0.90
1.10-1.50
0.80-1.20
1.50-1.80
0.25-0.35
0.06 MAX
0.15 MAX

Chilled Rolls manufacturers | Chilled Rolls manufacturers in India | Chilled Rolls manufacturers in Punjab | Chilled Rolls manufacturers in Ludhiana | Chilled Rolls manufacturers in Mandi Gobindgarh | Chilled Rolls manufacturers in Malerkotla

One Stop Shop for all Rolling Mill Machinery Requirements.

Contact Us

Pinch Roll

Home » Posts tagged "rolls"
Rolling Mill Machinery, Other Allied Machinery, ,

Pinch Roll Manufacturers

We are the biggest Pinch Roll manufacturers in India and are based in Malerkotla. We are one among the affluent manufacturers, exporters and suppliers of a good assortment of Pinch Rolls. Presented rolls are manufactured using supreme grade staple under the guidance of skilled team of execs. so as to make sure their top quality and excellent performance, these rolls are stringently tested on various defined parameters. Provided rolls are available in various specifications and are widely used for pressing mag tape against a capstan shaft. The offered Pinch Rolls are often availed from us at reasonable prices.

pinch roll manufacturers

The basic function of pinch rolls is to push the fabric during a particular direction. It doesn’t cause any quite phase change within the material and is typically wont to move the fabric over a distance. It’s installed at various places during a rolling mill like between the roughing mill and therefore the intermediate mill, before and after the TMT Quenching Box to take care of the speed and tension of bars. it’s driven through AC/DC Motor and consists of 2 Hi Gear Box, solid rolls with cardan shaft.

DC Pinch Rolls are installed at different places during a working steel mill , including the place between roughing mill and intermediate mill also as before and after TMT quenching box. the utilization of those rolls support maintenance of speeds and supply for consistent tension of bars

AC Pinch Rolls find application in pushing material especially direction and are designed to deliver precision working, thus allowing movement of the fabric over a distance without making in them any physical changes.

We are the foremost well-known name during this industry for Pinch Roll manufacturers in India. We are the industry leaders in nuts production since our products are of consistent quality, meet the required standards and are monitored by a top quality council during manufacturing and testing. We also customize orders as per our customer’s requirements for bulk orders.

Features & Specifications

  • DC Pinch Rolls are made available in two versions - conti-leaver type and pneumatic up to 360mm crs
  • We hold expertise in providing AC pinch roll comprising conti-leaver type mechanical up to 400mm crs
  • Pinch rolls featuring use of sensors that allows precision breaking up of speed of hot flowing material
  • Top roll comes raised pneumatically or lowered with bottom roll in adjustable finish
  • Pinch roll housing comprising sturdy welded construction
  • Pinch rolls feature wear resistant surface with anti friction bearing mounting support
  • Pneumatic cylinder for raising /lowering upper rocker arm
  • Spindle provided for meeting the needs of adjustment of bottom pinch rolls
  • Robust construction
  • Hassle-free functionality
  • High performance
  • Less Maintenance

Pinch Roll manufacturers | Pinch Roll manufacturers in India | Pinch Roll manufacturers in Punjab | Pinch Roll manufacturers in Ludhiana | Pinch Roll manufacturers in Mandi Gobindgarh | Pinch Roll manufacturers in Malerkotla

One Stop Shop for all Rolling Mill Machinery Requirements.

Contact Us